Filter Results
:
(10)
Show Results For
-
All HBS Web
(15)
- Faculty Publications (10)
Show Results For
-
All HBS Web
(15)
- Faculty Publications (10)
Page 1 of
10
Results
Faculty
W. Carl Kester
Carl Kester is a Baker Foundation Professor and the George Fisher Baker Jr. Professor of Business Administration, Emeritus at Harvard Business School. He is a member of the Finance Unit. He served as Deputy Dean for Academic Affairs (2006-2010), Chairman of the Finance Unit (2005-2006), and Senior Associate Dean and Chairman of the MBA Program (1999 to 2005). He teaches corporate finance in both...
- November 2014
- Teaching Note
Carl Zeiss and Free-Form Production: Can We See Clearly Yet?
By: Willy Shih
- July 2013 (Revised March 2015)
- Case
Carl Zeiss and Free-Form Production: Can We See Clearly Yet?
By: Willy Shih
The prescription eyeglass lens industry was complicated and highly fragmented, and even though many of the tools and techniques employed have been relatively unchanged over the last century, there was still a surprising pace of innovation. An aging population around...
View Details
Keywords:
History;
Demand and Consumers;
Disruptive Innovation;
Vertical Integration;
Theory;
Technology Adoption;
Health Industry
Shih, Willy. "Carl Zeiss and Free-Form Production: Can We See Clearly Yet?" Harvard Business School Case 614-007, July 2013. (Revised March 2015.)
- September 2012
- Supplement
Intraoperative Radiotherapy for Breast Cancer (B)
By: Willy Shih
The intraoperative radiotherapy (IORT) business at Carl Zeiss Meditec had struggled with growth since the time of the (A) case. Though the unit had grown revenues in excess of 50% and had exceeded its EBIT target, it faced several key strategic choices. Should it...
View Details
Keywords:
Radiotherapy;
Breast Cancer;
Brachytherapy;
Therapeutic Radiation;
Oncology;
Oncology Treatment Systems;
Elekta AB;
Varian Medical Systems;
Xoft;
Electronic Brachytherapy;
Intraoperative Radiotherapy;
Disruptive Innovation;
Health Care and Treatment;
Entrepreneurship;
Technological Innovation;
Growth and Development Strategy;
Health Industry;
Germany
Shih, Willy. "Intraoperative Radiotherapy for Breast Cancer (B)." Harvard Business School Supplement 613-040, September 2012.
- September 2012 (Revised April 2013)
- Case
Digital Microscopy at Carl Zeiss: Managing Disruption
By: Willy Shih
Ulrich Simon, the head of the Microscopy business group at Carl Zeiss AG knew that his unit was facing a disruptive threat, so he chartered a special team to tackle the industrial segment. Given a high degree of autonomy, the project team developed an understanding of...
View Details
Keywords:
Modularity;
High Technology Products;
Emergent Strategy;
Product Lines;
Corporate Strategy;
Digital Platforms;
Disruptive Innovation;
Technology Industry;
Germany
Shih, Willy. "Digital Microscopy at Carl Zeiss: Managing Disruption." Harvard Business School Case 613-039, September 2012. (Revised April 2013.)
- September 2012
- Supplement
Industrial Metrology: Getting In-Line? (B)
By: Willy Shih
Rainer Ohnheiser, the President of Carl Zeiss's Business Group Industrial Metrology (IMT), was focused on the threat that in-line metrology posed to Carl Zeiss IMT's core business. Historically, coordinate measurement machines (CMMs) that employed tactile measurement...
View Details
Keywords:
Performance Trajectories;
Emerging Technologies;
Manufacturing Tools;
Carl Zeiss;
Go-to-market Strategy;
Disruptive Innovation;
Technological Innovation;
Production;
Performance Improvement;
Measurement and Metrics;
Manufacturing Industry;
Germany
Shih, Willy. "Industrial Metrology: Getting In-Line? (B)." Harvard Business School Supplement 613-041, September 2012.
- September 2011
- Supplement
TopCoder (B)
By: Karim R. Lakhani, Eric Lonstein and Stephanie Pokrywa
Metrology plays a key role in the manufacture of mechanical components. Traditionally it is used extensively in a pre-process stage where a manufacturer does process planning, design, and ramp-up, and in post-process off-line inspection to establish proof of quality....
View Details
Keywords:
Industry Growth;
Forecasting and Prediction;
Change Management;
Production;
Machinery and Machining;
Planning;
Quality;
Competition;
Diversification;
Technology Adoption;
Measurement and Metrics;
Product Design;
Manufacturing Industry
Lakhani, Karim R., Eric Lonstein, and Stephanie Pokrywa. "TopCoder (B)." Harvard Business School Supplement 612-044, September 2011.
- July 2011 (Revised September 2012)
- Case
Intraoperative Radiotherapy for Breast Cancer (A)
By: Willy Shih
"This trial is going to take longer." Those were words that Michael Kaschke, CEO of Carl Zeiss AG, was not surprised to hear as he nurtured the intraoperative radiotherapy business inside his company's microsurgery unit. But he also didn't expect it to take 13 years to...
View Details
Keywords:
Finance;
Business History;
Disruptive Innovation;
Emerging Markets;
Organizational Change and Adaptation;
Research and Development;
Safety
Shih, Willy. "Intraoperative Radiotherapy for Breast Cancer (A)." Harvard Business School Case 612-003, July 2011. (Revised September 2012.)
- July 2011 (Revised January 2013)
- Case
Digital Microscopy Is Making Me Crazy!
By: Willy Shih
For Carl Zeiss Microimaging, modular hardware and software enabled customers to tailor Zeiss's broad range of microscopy systems hardware and software to meet a wide range of needs from basic scientific research in the biological and medical sciences to clinical...
View Details
Keywords:
Information Infrastructure;
Applications and Software;
Corporate Strategy;
Disruptive Innovation;
Science-Based Business;
Management Analysis, Tools, and Techniques;
Business Conglomerates;
Digital Platforms;
Opportunities;
Medical Devices and Supplies Industry;
Computer Industry
Shih, Willy. "Digital Microscopy Is Making Me Crazy!" Harvard Business School Case 612-002, July 2011. (Revised January 2013.)
- July 2011 (Revised September 2012)
- Case
Industrial Metrology: Getting In-Line? (A)
By: Willy Shih
Metrology plays a key role in the manufacture of mechanical components. Traditionally it is used extensively in a pre-process stage where a manufacturer does process planning, design, and ramp-up, and in post-process off-line inspection to establish proof of quality....
View Details
Keywords:
Transformation;
Machinery and Machining;
Measurement and Metrics;
Product Design;
Planning;
Quality;
Opportunities;
Competitive Strategy;
Diversification;
Segmentation;
Technology Adoption;
Theory;
Manufacturing Industry
Shih, Willy. "Industrial Metrology: Getting In-Line? (A)." Harvard Business School Case 612-004, July 2011. (Revised September 2012.)
- July 2011 (Revised July 2013)
- Teaching Note
Carl Zeiss and Free-Form Production: Can We See Clearly Yet?
By: Willy Shih
Teaching Note for 614-007
View Details
Keywords:
Health Industry